Obsah fóra koppel.cz koppel.cz
Díky, krtku...
 
 FAQFAQ   HledatHledat   Seznam uživatelůSeznam uživatelů   Uživatelské skupinyUživatelské skupiny   RegistraceRegistrace 
 ProfilProfil   Soukromé zprávySoukromé zprávy   PřihlášeníPřihlášení 

[updated 29.10.08-again problem] bluetooth and your firmware
Jdi na stránku 1, 2  Další
 
Přidat nové téma   Zaslat odpověď    Obsah fóra koppel.cz -> English: Our firmware for USB modems
Zobrazit předchozí téma :: Zobrazit následující téma  
Autor Zpráva
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: út duben 15, 2008 4:13 pm    Předmět: [updated 29.10.08-again problem] bluetooth and your firmware Citovat

I plan use GPRS USB connection and use your firmware

http://koppel.cz/cdmawifi/download/169/WL500gp-1.9.2.7-10-USB-1.69.trx

but bluetooth not want work!

---------------------
previously I use original custom Oleg firmware
http://oleg.wl500g.info/1.9.2.7-10/WL500gp-1.9.2.7-10.zip
and modules http://oleg.wl500g.info/1.9.2.7-10/modules-1.9.2.7-10.tgz

and this commands to start bluetooth:
ipkg install bluez-libs
ipkg install bluez-utils
ipkg install bluez-hcidump

insmod bluez.o
insmod hci_usb.o
insmod l2cap.o
insmod rfcomm.o
insmod bnep.o
insmod sco.o

rm /opt/var/run/dbus/pid
dbus-daemon --system
hcid
hciconfig hci0 up piscan
sdpd
pand --listen --master --role NAP --devup /tmp/harddisk/bluez/dev-up

dev-up script:
ifconfig bnep0 up
brctl addif br0 bnep0
-----------------

with firmware WL500gp-1.9.2.7-10-USB-1.69.trx after command hcid router allways REBOOT!!! when usb bluetooth dongle attached!!!

1. please help to resolve problem!!!!

2. can you make bluetooth serial GPRS choice on your USB connection tab?


Naposledy upravil AndreyPopov dne pá říjen 31, 2008 4:05 pm, celkově upraveno 4 krát.
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: út duben 15, 2008 6:35 pm    Předmět: Citovat

1) I will check this
2) We don't plan to do so.
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: út duben 15, 2008 7:10 pm    Předmět: bluetooth and your firmware Citovat

engy napsal:
1) I will check this
2) We don't plan to do so.


1) I hope you solve problem

2) why no? bluetooth serial GPRS connection is similar to usb serial GPRS connection. it's work! like this:
http://wl500g.info/showpost.php?p=69013&postcount=71

this one more menu item in your USB Connection:

GPRS/EDGE/UMTS connection via USB connected GSM or
GPRS/EDGE/UMTS connection via USB-serial converter and GSM.

GPRS/EDGE/UMTS connection via usb bluetooth connected GSM


???????????

it's real?
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: út duben 15, 2008 7:20 pm    Předmět: Citovat

This can be done by user dial file.
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: út duben 15, 2008 7:44 pm    Předmět: bluetooth and your firmware Citovat

engy napsal:
This can be done by user dial file.


I agree.

but may be: automatic installing bluetooth and enabling GPRS by bluetooth - this is reason to add menu and startup script for this type of connection?

username
password
apn
dial number

all this needed for bluetooth GPRS - and you have web form for this.

start bluez module
add rfcomm service
pair devices
start dial-up script

next steps

I can do they manually, but many users can use YOUR firmware for easy steps Very Happy
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: st květen 14, 2008 4:55 pm    Předmět: bluetooth Citovat

engy napsal:
1) I will check this
2) We don't plan to do so.


are you check?
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: st květen 14, 2008 6:51 pm    Předmět: Re: bluetooth Citovat

AndreyPopov napsal:
engy napsal:
1) I will check this
2) We don't plan to do so.


are you check?

Not yet. Maybe next week I will have some free time.
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: st květen 14, 2008 8:30 pm    Předmět: Re: bluetooth Citovat

engy napsal:
AndreyPopov napsal:
engy napsal:
1) I will check this
2) We don't plan to do so.


are you check?

Not yet. Maybe next week I will have some free time.


I hope.

because one more user post same problem in http://wl500g.info/showpost.php?p=96903&postcount=127
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: pá květen 23, 2008 5:17 pm    Předmět: Re: bluetooth Citovat

engy napsal:
AndreyPopov napsal:
engy napsal:
1) I will check this
2) We don't plan to do so.


are you check?

Not yet. Maybe next week I will have some free time.


any news?
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: út květen 27, 2008 10:47 am    Předmět: Citovat

Works fine for me on our firmware :
kód:

[admin@WL-0017311B03BD lll]$ adduser messagebus
adduser: /home/messagebus: Read-only file system
Changing password for messagebus
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:
Bad password: too short.

Warning: weak password (continuing).
Re-enter new password:
Password changed.

[admin@WL-0017311B03BD lll]$ insmod bluez.o
[admin@WL-0017311B03BD lll]$ insmod hci_usb.o
[admin@WL-0017311B03BD lll]$ insmod l2cap.o
[admin@WL-0017311B03BD lll]$ insmod rfcomm.o
[admin@WL-0017311B03BD lll]$ insmod bnep.o
[admin@WL-0017311B03BD lll]$ insmod sco.o
[admin@WL-0017311B03BD lll]$
[admin@WL-0017311B03BD lll]$ rm /opt/var/run/dbus/pid
[admin@WL-0017311B03BD lll]$ dbus-daemon --system
[admin@WL-0017311B03BD lll]$ hcid

[admin@WL-0017311B03BD lll]$ hcitool scan
Scanning ...
        00:19:B7:4A:xx:xx       E50-Engy
        00:1A:6B:30:xx:xx

[admin@WL-0017311B03BD lll]$ cat /.version
1.9.2.7-10-USB-1.69

[admin@WL-0017311B03BD lll]$ uname -a
Linux WL-0017311B03BD 2.4.20 #8 So dub 5 21:06:23 CEST 2008 mips unknown

[admin@WL-0017311B03BD lll]$ ls -al
drwxr-xr-x    2 admin    root         1024 May 27 08:09 .
drwxr-xr-x   15 admin    root         1024 May 27 08:25 ..
-rw-r--r--    1 admin    root        64496 Mar 29 19:10 bluez.o
-rw-r--r--    1 admin    root        19632 Mar 29 19:10 bnep.o
-rw-r--r--    1 admin    root        16468 Mar 29 19:10 hci_usb.o
-rw-r--r--    1 admin    root        35144 Mar 29 19:10 l2cap.o
-rw-r--r--    1 admin    root        60196 Mar 29 19:10 rfcomm.o
-rw-r--r--    1 admin    root        21952 Mar 29 19:10 sco.o

[admin@WL-0017311B03BD lll]$
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: út květen 27, 2008 11:37 am    Předmět: Citovat

engy napsal:
Works fine for me on our firmware :
kód:

[admin@WL-0017311B03BD lll]$ adduser messagebus
adduser: /home/messagebus: Read-only file system
Changing password for messagebus
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:
Bad password: too short.

Warning: weak password (continuing).
Re-enter new password:
Password changed.

[admin@WL-0017311B03BD lll]$ insmod bluez.o
[admin@WL-0017311B03BD lll]$ insmod hci_usb.o
[admin@WL-0017311B03BD lll]$ insmod l2cap.o
[admin@WL-0017311B03BD lll]$ insmod rfcomm.o
[admin@WL-0017311B03BD lll]$ insmod bnep.o
[admin@WL-0017311B03BD lll]$ insmod sco.o
[admin@WL-0017311B03BD lll]$
[admin@WL-0017311B03BD lll]$ rm /opt/var/run/dbus/pid
[admin@WL-0017311B03BD lll]$ dbus-daemon --system
[admin@WL-0017311B03BD lll]$ hcid

[admin@WL-0017311B03BD lll]$ hcitool scan
Scanning ...
        00:19:B7:4A:xx:xx       E50-Engy
        00:1A:6B:30:xx:xx

[admin@WL-0017311B03BD lll]$ cat /.version
1.9.2.7-10-USB-1.69

[admin@WL-0017311B03BD lll]$ uname -a
Linux WL-0017311B03BD 2.4.20 #8 So dub 5 21:06:23 CEST 2008 mips unknown

[admin@WL-0017311B03BD lll]$ ls -al
drwxr-xr-x    2 admin    root         1024 May 27 08:09 .
drwxr-xr-x   15 admin    root         1024 May 27 08:25 ..
-rw-r--r--    1 admin    root        64496 Mar 29 19:10 bluez.o
-rw-r--r--    1 admin    root        19632 Mar 29 19:10 bnep.o
-rw-r--r--    1 admin    root        16468 Mar 29 19:10 hci_usb.o
-rw-r--r--    1 admin    root        35144 Mar 29 19:10 l2cap.o
-rw-r--r--    1 admin    root        60196 Mar 29 19:10 rfcomm.o
-rw-r--r--    1 admin    root        21952 Mar 29 19:10 sco.o

[admin@WL-0017311B03BD lll]$


1. I'm use "admin" user name, NOT add messagebus. edit in .conf file messagebus -> admin
2. all commands that you execute also executed. but you NOT execute next commands:
hciconfig hci0 up piscan
sdpd
pand --listen --master --role NAP --devup /tmp/harddisk/bluez/dev-up


please try these!
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: út květen 27, 2008 11:57 am    Předmět: Citovat

Still works
kód:
[admin@asus lll]$ insmod bluez.o
[admin@asus lll]$ insmod hci_usb.o
[admin@asus lll]$ insmod l2cap.o
[admin@asus lll]$ insmod rfcomm.o
[admin@asus lll]$ insmod bnep.o
[admin@asus lll]$ insmod sco.o
[admin@asus lll]$
[admin@asus lll]$ rm /opt/var/run/dbus/pid
[admin@asus lll]$ dbus-daemon --system
[admin@asus lll]$ hcid
[admin@asus lll]$ hciconfig hci0 up piscan
[admin@asus lll]$ sdpd
[admin@asus lll]$ pand --listen --master --role NAP --devup /tmp/harddisk/bluez/dev-up
[admin@asus lll]$ hcitool scan
Scanning ...
        00:1A:6B:30:92:D9
        00:19:B7:4A:BF:99       E50-Engy
[admin@asus lll]$
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: út květen 27, 2008 3:39 pm    Předmět: Citovat

engy napsal:
Still works
kód:
[admin@asus lll]$ insmod bluez.o
[admin@asus lll]$ insmod hci_usb.o
[admin@asus lll]$ insmod l2cap.o
[admin@asus lll]$ insmod rfcomm.o
[admin@asus lll]$ insmod bnep.o
[admin@asus lll]$ insmod sco.o
[admin@asus lll]$
[admin@asus lll]$ rm /opt/var/run/dbus/pid
[admin@asus lll]$ dbus-daemon --system
[admin@asus lll]$ hcid
[admin@asus lll]$ hciconfig hci0 up piscan
[admin@asus lll]$ sdpd
[admin@asus lll]$ pand --listen --master --role NAP --devup /tmp/harddisk/bluez/dev-up
[admin@asus lll]$ hcitool scan
Scanning ...
        00:1A:6B:30:92:D9
        00:19:B7:4A:BF:99       E50-Engy
[admin@asus lll]$


this log with startr-bluez enabled command and inserting bluetooth dongle.

May 27 17:14:23 kernel: BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:14:23 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:14:24 kernel: BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:14:24 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:14:25 kernel: BlueZ SCO ver 0.3 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:14:25 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:14:26 kernel: BlueZ BNEP ver 1.2
May 27 17:14:26 kernel: Copyright (C) 2001,2002 Inventel Systemes
May 27 17:14:26 kernel: Written 2001,2002 by Clement Moreau <clement.moreau@inventel.fr>
May 27 17:14:26 kernel: Written 2001,2002 by David Libault <david.libault@inventel.fr>
May 27 17:14:26 kernel: Copyright (C) 2002 Maxim Krasnyanskiy <maxk@qualcomm.com>
May 27 17:14:26 kernel: BlueZ RFCOMM ver 1.1
May 27 17:14:26 kernel: Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:14:26 kernel: Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
May 27 17:14:28 kernel: BlueZ HCI USB driver ver 2.7 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:14:28 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:14:28 kernel: usb.c: registered new driver hci_usb
May 27 17:14:31 hcid[180]: Bluetooth HCI daemon
May 27 17:14:33 sdpd[184]: Bluetooth SDP daemon
May 27 17:14:33 sdpd[184]: Starting SDP server
May 27 17:14:34 hcid[180]: Created local server at unix:abstract=/var/run/dbus-Jad4MAAUDt,guid=44e23d3d7f3d15c18e55c900483c174a
May 27 17:14:35 thttpd[166]: thttpd/2.25b PHP/5.2.5 starting on port 8085
May 27 17:14:35 thttpd[166]: started as root without requesting chroot(), warning only
May 27 17:14:42 ntp client: Synchronizing time with pool.ntp.org ...
May 27 17:15:01 /opt/sbin/cron[194]: (admin) CMD (/opt/bin/run-parts /opt/etc/cron.5mins )
May 27 17:15:46 kernel: hub.c: new USB device 01:03.0-2, assigned address 2
May 27 17:15:46 kernel: Manufacturer: Broadcom Corp
May 27 17:15:46 kernel: Product: ASUS Bluetooth Dongle


no more information.

this log with start-bluez command disabled and inserted bluetooth dongle:
Jan 1 02:00:02 syslogd started: BusyBox v1.1.3
Jan 1 02:00:03 dnsmasq[76]: started, version 2.22 cachesize 150
Jan 1 02:00:03 dnsmasq[76]: read /etc/hosts - 5 addresses
Jan 1 02:00:03 kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
Jan 1 02:00:03 kernel: ttyS01 at 0xb8000400 (irq = 3) is a 16550A
Jan 1 02:00:03 kernel: HDLC line discipline: version $Revision$, maxframe=4096
Jan 1 02:00:03 kernel: N_HDLC line discipline registered.
Jan 1 02:00:03 kernel: loop: loaded (max 8 devices)
Jan 1 02:00:03 kernel: PPP generic driver version 2.4.2
Jan 1 02:00:03 kernel: PPP Deflate Compression module registered
Jan 1 02:00:03 kernel: PPP BSD Compression module registered
Jan 1 02:00:03 kernel: MPPE/MPPC encryption/compression module registered
Jan 1 02:00:03 kernel: PPPoL2TP kernel driver, V0.13 (oleg@cs.msu.su)
Jan 1 02:00:03 dnsmasq[76]: reading /tmp/resolv.conf
Jan 1 02:00:03 kernel: Amd/Fujitsu Extended Query Table v1.3 at 0x0040
Jan 1 02:00:03 kernel: Flash Id: Vendor: 0x0001 Device: 0x007e
Jan 1 02:00:03 kernel: number of CFI chips: 1
Jan 1 02:00:03 kernel: Flash device: 0x800000 at 0x1c000000
Jan 1 02:00:03 kernel: Physically mapped flash: squashfs filesystem found at block 867
Jan 1 02:00:03 kernel: Creating 5 MTD partitions on "Physically mapped flash":
Jan 1 02:00:03 kernel: 0x00000000-0x00040000 : "boot"
Jan 1 02:00:03 kernel: 0x00040000-0x007f0000 : "linux"
Jan 1 02:00:03 kernel: 0x000d8f60-0x007f0000 : "rootfs"
Jan 1 02:00:03 kernel: 0x007f0000-0x00800000 : "nvram"
Jan 1 02:00:03 kernel: 0x003e0000-0x007f0000 : "flashfs"
Jan 1 02:00:03 kernel: sflash: found no supported devices
Jan 1 02:00:03 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 1 02:00:03 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jan 1 02:00:03 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan 1 02:00:03 kernel: TCP: Hash tables configured (established 2048 bind 4096)
Jan 1 02:00:03 kernel: Linux IP multicast router 0.06 plus PIM-SM
Jan 1 02:00:03 kernel: ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack
Jan 1 02:00:03 kernel: ip_conntrack_pptp version 1.9 loaded
Jan 1 02:00:03 kernel: ip_nat_pptp version 1.5 loaded
Jan 1 02:00:03 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 02:00:03 kernel: ipt_time loading
Jan 1 02:00:03 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 02:00:03 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 02:00:03 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
Jan 1 02:00:03 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 02:00:03 kernel: FAT: bogus logical sector size 39168
Jan 1 02:00:03 kernel: FAT: bogus logical sector size 39168
Jan 1 02:00:03 kernel: NTFS: Unable to set blocksize 512.
Jan 1 02:00:03 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 02:00:03 kernel: Mounted devfs on /dev
Jan 1 02:00:03 kernel: Freeing unused kernel memory: 68k freed
Jan 1 02:00:03 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 02:00:03 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
Jan 1 02:00:03 kernel: PCI: Enabling device 01:02.0 (0004 -> 0006)
Jan 1 02:00:03 kernel: eth1: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.16
Jan 1 02:00:03 kernel: device eth0 entered promiscuous mode
Jan 1 02:00:03 kernel: device vlan0 entered promiscuous mode
Jan 1 02:00:03 kernel: device eth1 entered promiscuous mode
Jan 1 02:00:03 kernel: br0: port 2(eth1) entering learning state
Jan 1 02:00:03 kernel: br0: port 1(vlan0) entering learning state
Jan 1 02:00:03 kernel: br0: port 2(eth1) entering forwarding state
Jan 1 02:00:03 kernel: br0: topology change detected, propagating
Jan 1 02:00:03 kernel: br0: port 1(vlan0) entering forwarding state
Jan 1 02:00:03 kernel: br0: topology change detected, propagating
Jan 1 02:00:03 kernel: usb.c: registered new driver usbdevfs
Jan 1 02:00:03 kernel: usb.c: registered new driver hub
Jan 1 02:00:03 kernel: usb-uhci.c: $Revision: 1.275 $ time 23:51:07 Mar 30 2008
Jan 1 02:00:03 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 02:00:03 kernel: PCI: Enabling device 01:03.0 (0000 -> 0001)
Jan 1 02:00:03 kernel: ECHI PCI device 30381106 found.
Jan 1 02:00:03 kernel: UCHI reg 0x41 = 10
Jan 1 02:00:03 kernel: UCHI reg 0x41 changed to = 0
Jan 1 02:00:03 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
Jan 1 02:00:03 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:03 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 02:00:03 kernel: Product: USB UHCI Root Hub
Jan 1 02:00:03 kernel: SerialNumber: 100
Jan 1 02:00:03 kernel: hub.c: USB hub found
Jan 1 02:00:03 kernel: hub.c: 2 ports detected
Jan 1 02:00:03 kernel: PCI: Enabling device 01:03.1 (0000 -> 0001)
Jan 1 02:00:03 kernel: ECHI PCI device 30381106 found.
Jan 1 02:00:03 kernel: UCHI reg 0x41 = 10
Jan 1 02:00:03 kernel: UCHI reg 0x41 changed to = 0
Jan 1 02:00:03 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
Jan 1 02:00:03 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:03 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 02:00:03 kernel: Product: USB UHCI Root Hub
Jan 1 02:00:03 kernel: SerialNumber: 120
Jan 1 02:00:03 kernel: hub.c: USB hub found
Jan 1 02:00:03 kernel: hub.c: 2 ports detected
Jan 1 02:00:03 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 1 02:00:04 kernel: PCI: Enabling device 01:03.2 (0000 -> 0002)
Jan 1 02:00:04 kernel: ehci_hcd 01:03.2: PCI device 1106:3104
Jan 1 02:00:04 kernel: ehci_hcd 01:03.2: irq 12, pci mem c0004000
Jan 1 02:00:04 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 02:00:04 kernel: ECHI PCI device 31041106 found.
Jan 1 02:00:04 kernel: ECHI reg 0x49 = 80010f20
Jan 1 02:00:04 kernel: ECHI reg 0x49 changed to = 80010f00
Jan 1 02:00:04 kernel: ECHI reg 0x4b = 80010f09
Jan 1 02:00:04 kernel: ECHI reg 0x4b changed to = 80010f29
Jan 1 02:00:04 kernel: PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
Jan 1 02:00:04 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 02:00:04 kernel: Manufacturer: Linux 2.4.20 ehci_hcd
Jan 1 02:00:04 kernel: Product: PCI device 1106:3104
Jan 1 02:00:04 kernel: SerialNumber: 01:03.2
Jan 1 02:00:04 kernel: hub.c: USB hub found
Jan 1 02:00:04 kernel: hub.c: 4 ports detected
Jan 1 02:00:04 kernel: hub.c: connect-debounce failed, port 1 disabled
Jan 1 02:00:05 kernel: hub.c: new USB device 01:03.2-1, assigned address 2
Jan 1 02:00:05 kernel: Manufacturer: CANYON USB 2.0 Disk
Jan 1 02:00:05 kernel: Product: USB Embedded Hub
Jan 1 02:00:05 kernel: hub.c: USB hub found
Jan 1 02:00:05 kernel: hub.c: 1 port detected
Jan 1 02:00:06 kernel: hub.c: new USB device 01:03.2-1.1, assigned address 3
Jan 1 02:00:06 kernel: Manufacturer: CANYON USB 2.0 Disk
Jan 1 02:00:06 kernel: Product: USB Mass Storage Device
Jan 1 02:00:06 kernel: usb.c: USB device 3 (vend/prod 0x67b/0x2517) is not claimed by any active driver.
Jan 1 02:00:06 kernel: Length = 18
Jan 1 02:00:06 kernel: DescriptorType = 01
Jan 1 02:00:06 kernel: USB version = 2.00
Jan 1 02:00:06 kernel: Vendor:Product = 067b:2517
Jan 1 02:00:06 kernel: MaxPacketSize0 = 64
Jan 1 02:00:06 kernel: NumConfigurations = 1
Jan 1 02:00:06 kernel: Device version = 0.01
Jan 1 02:00:06 kernel: Device Class:SubClass:Protocol = 00:00:00
Jan 1 02:00:06 kernel: Per-interface classes
Jan 1 02:00:06 kernel: Configuration:
Jan 1 02:00:06 kernel: bLength = 9
Jan 1 02:00:06 kernel: bDescriptorType = 02
Jan 1 02:00:06 kernel: wTotalLength = 0020
Jan 1 02:00:06 kernel: bNumInterfaces = 01
Jan 1 02:00:06 kernel: bConfigurationValue = 01
Jan 1 02:00:06 kernel: iConfiguration = 00
Jan 1 02:00:06 kernel: bmAttributes = c0
Jan 1 02:00:06 kernel: MaxPower = 0mA
Jan 1 02:00:06 kernel:
Jan 1 02:00:06 kernel: Interface: 0
Jan 1 02:00:06 kernel: Alternate Setting: 0
Jan 1 02:00:06 kernel: bLength = 9
Jan 1 02:00:06 kernel: bDescriptorType = 04
Jan 1 02:00:06 kernel: bInterfaceNumber = 00
Jan 1 02:00:06 kernel: bAlternateSetting = 00
Jan 1 02:00:06 kernel: bNumEndpoints = 02
Jan 1 02:00:06 kernel: bInterface Class:SubClass:Protocol = 08:05:50
Jan 1 02:00:06 kernel: iInterface = 00
Jan 1 02:00:06 kernel: Endpoint:
Jan 1 02:00:06 kernel: bLength = 7
Jan 1 02:00:06 kernel: bDescriptorType = 05
Jan 1 02:00:06 kernel: bEndpointAddress = 01 (out)
Jan 1 02:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 02:00:06 kernel: wMaxPacketSize = 0200
Jan 1 02:00:06 kernel: bInterval = 00
Jan 1 02:00:06 kernel: Endpoint:
Jan 1 02:00:06 kernel: bLength = 7
Jan 1 02:00:06 kernel: bDescriptorType = 05
Jan 1 02:00:06 kernel: bEndpointAddress = 82 (in)
Jan 1 02:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 02:00:06 kernel: wMaxPacketSize = 0200
Jan 1 02:00:06 kernel: bInterval = 00
Jan 1 02:00:06 kernel: usb.c: registered new driver usblp
Jan 1 02:00:06 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 02:00:06 kernel: usb.c: registered new driver audio
Jan 1 02:00:06 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 02:00:06 kernel: Linux video capture interface: v1.00
Jan 1 02:00:06 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 02:00:07 kernel: Initializing USB Mass Storage driver...
Jan 1 02:00:07 kernel: usb.c: registered new driver usb-storage
Jan 1 02:00:07 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 02:00:07 kernel: Vendor: CANYON Model: USB 2.0 Disk Rev: PROL
Jan 1 02:00:07 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 02:00:07 kernel: hub.c: new USB device 01:03.0-2, assigned address 2
Jan 1 02:00:07 kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 02:00:07 kernel: SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
Jan 1 02:00:07 kernel: sda: Write Protect is off
Jan 1 02:00:07 kernel: Partition check:
Jan 1 02:00:07 kernel: unknown partition table
Jan 1 02:00:07 kernel: USB Mass Storage support registered.
Jan 1 02:00:07 kernel: Manufacturer: Broadcom Corp
Jan 1 02:00:07 kernel: Product: ASUS Bluetooth Dongle
Jan 1 02:00:07 kernel: usb.c: USB device 2 (vend/prod 0xb05/0x1715) is not claimed by any active driver.
Jan 1 02:00:07 kernel: Length = 18
Jan 1 02:00:07 kernel: DescriptorType = 01
Jan 1 02:00:07 kernel: USB version = 2.00
Jan 1 02:00:07 kernel: Vendor:Product = 0b05:1715
Jan 1 02:00:07 kernel: MaxPacketSize0 = 64
Jan 1 02:00:07 kernel: NumConfigurations = 1
Jan 1 02:00:07 kernel: Device version = 1.00
Jan 1 02:00:07 kernel: Device Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:07 kernel: Unknown class
Jan 1 02:00:07 kernel: Configuration:
Jan 1 02:00:07 kernel: bLength = 9
Jan 1 02:00:07 kernel: bDescriptorType = 02
Jan 1 02:00:07 kernel: wTotalLength = 00d8
Jan 1 02:00:07 kernel: bNumInterfaces = 04
Jan 1 02:00:07 kernel: bConfigurationValue = 01
Jan 1 02:00:07 kernel: iConfiguration = 00
Jan 1 02:00:07 kernel: bmAttributes = a0
Jan 1 02:00:07 kernel: MaxPower = 100mA
Jan 1 02:00:07 kernel:
Jan 1 02:00:07 kernel: Interface: 0
Jan 1 02:00:07 kernel: Alternate Setting: 0
Jan 1 02:00:07 kernel: bLength = 9
Jan 1 02:00:07 kernel: bDescriptorType = 04
Jan 1 02:00:07 kernel: bInterfaceNumber = 00
Jan 1 02:00:07 kernel: bAlternateSetting = 00
Jan 1 02:00:07 kernel: bNumEndpoints = 03
Jan 1 02:00:07 kernel: bInterface Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:07 kernel: iInterface = 00
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 81 (in)
Jan 1 02:00:07 kernel: bmAttributes = 03 (Interrupt)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0010
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 82 (in)
Jan 1 02:00:07 kernel: bmAttributes = 02 (Bulk)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0040
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 02 (out)
Jan 1 02:00:07 kernel: bmAttributes = 02 (Bulk)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0040
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel:
Jan 1 02:00:07 kernel: Interface: 1
Jan 1 02:00:07 kernel: Alternate Setting: 0
Jan 1 02:00:07 kernel: bLength = 9
Jan 1 02:00:07 kernel: bDescriptorType = 04
Jan 1 02:00:07 kernel: bInterfaceNumber = 01
Jan 1 02:00:07 kernel: bAlternateSetting = 00
Jan 1 02:00:07 kernel: bNumEndpoints = 02
Jan 1 02:00:07 kernel: bInterface Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:07 kernel: iInterface = 00
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 83 (in)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0000
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 03 (out)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0000
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Alternate Setting: 1
Jan 1 02:00:07 kernel: bLength = 9
Jan 1 02:00:07 kernel: bDescriptorType = 04
Jan 1 02:00:07 kernel: bInterfaceNumber = 01
Jan 1 02:00:07 kernel: bAlternateSetting = 01
Jan 1 02:00:07 kernel: bNumEndpoints = 02
Jan 1 02:00:07 kernel: bInterface Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:07 kernel: iInterface = 00
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 83 (in)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0009
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 03 (out)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0009
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Alternate Setting: 2
Jan 1 02:00:07 kernel: bLength = 9
Jan 1 02:00:07 kernel: bDescriptorType = 04
Jan 1 02:00:07 kernel: bInterfaceNumber = 01
Jan 1 02:00:07 kernel: bAlternateSetting = 02
Jan 1 02:00:07 kernel: bNumEndpoints = 02
Jan 1 02:00:07 kernel: bInterface Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:07 kernel: iInterface = 00
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 83 (in)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0011
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 03 (out)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0011
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Alternate Setting: 3
Jan 1 02:00:07 kernel: bLength = 9
Jan 1 02:00:07 kernel: bDescriptorType = 04
Jan 1 02:00:07 kernel: bInterfaceNumber = 01
Jan 1 02:00:07 kernel: bAlternateSetting = 03
Jan 1 02:00:07 kernel: bNumEndpoints = 02
Jan 1 02:00:07 kernel: bInterface Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:07 kernel: iInterface = 00
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 83 (in)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0019
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Endpoint:
Jan 1 02:00:07 kernel: bLength = 7
Jan 1 02:00:07 kernel: bDescriptorType = 05
Jan 1 02:00:07 kernel: bEndpointAddress = 03 (out)
Jan 1 02:00:07 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:07 kernel: wMaxPacketSize = 0019
Jan 1 02:00:07 kernel: bInterval = 01
Jan 1 02:00:07 kernel: Alternate Setting: 4
Jan 1 02:00:07 kernel: bLength = 9
Jan 1 02:00:07 kernel: bDescriptorType = 04
Jan 1 02:00:07 kernel: bInterfaceNumber = 01
Jan 1 02:00:07 kernel: bAlternateSetting = 04
Jan 1 02:00:08 kernel: bNumEndpoints = 02
Jan 1 02:00:08 kernel: bInterface Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:08 kernel: iInterface = 00
Jan 1 02:00:08 kernel: Endpoint:
Jan 1 02:00:08 kernel: bLength = 7
Jan 1 02:00:08 kernel: bDescriptorType = 05
Jan 1 02:00:08 kernel: bEndpointAddress = 83 (in)
Jan 1 02:00:08 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:08 kernel: wMaxPacketSize = 0021
Jan 1 02:00:08 kernel: bInterval = 01
Jan 1 02:00:08 kernel: Endpoint:
Jan 1 02:00:08 kernel: bLength = 7
Jan 1 02:00:08 kernel: bDescriptorType = 05
Jan 1 02:00:08 kernel: bEndpointAddress = 03 (out)
Jan 1 02:00:08 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:08 kernel: wMaxPacketSize = 0021
Jan 1 02:00:08 kernel: bInterval = 01
Jan 1 02:00:08 kernel: Alternate Setting: 5
Jan 1 02:00:08 kernel: bLength = 9
Jan 1 02:00:08 kernel: bDescriptorType = 04
Jan 1 02:00:08 kernel: bInterfaceNumber = 01
Jan 1 02:00:08 kernel: bAlternateSetting = 05
Jan 1 02:00:08 kernel: bNumEndpoints = 02
Jan 1 02:00:08 kernel: bInterface Class:SubClass:Protocol = e0:01:01
Jan 1 02:00:08 kernel: iInterface = 00
Jan 1 02:00:08 kernel: Endpoint:
Jan 1 02:00:08 kernel: bLength = 7
Jan 1 02:00:08 kernel: bDescriptorType = 05
Jan 1 02:00:08 kernel: bEndpointAddress = 83 (in)
Jan 1 02:00:08 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:08 kernel: wMaxPacketSize = 0031
Jan 1 02:00:08 kernel: bInterval = 01
Jan 1 02:00:08 kernel: Endpoint:
Jan 1 02:00:08 kernel: bLength = 7
Jan 1 02:00:08 kernel: bDescriptorType = 05
Jan 1 02:00:08 kernel: bEndpointAddress = 03 (out)
Jan 1 02:00:08 kernel: bmAttributes = 01 (Isochronous)
Jan 1 02:00:08 kernel: wMaxPacketSize = 0031
Jan 1 02:00:08 kernel: bInterval = 01
Jan 1 02:00:08 kernel:
Jan 1 02:00:08 kernel: Interface: 2
Jan 1 02:00:08 kernel: Alternate Setting: 0
Jan 1 02:00:08 kernel: bLength = 9
Jan 1 02:00:08 kernel: bDescriptorType = 04
Jan 1 02:00:08 kernel: bInterfaceNumber = 02
Jan 1 02:00:08 kernel: bAlternateSetting = 00
Jan 1 02:00:08 kernel: bNumEndpoints = 02
Jan 1 02:00:08 kernel: bInterface Class:SubClass:Protocol = ff:ff:ff
Jan 1 02:00:08 kernel: iInterface = 00
Jan 1 02:00:08 kernel: Endpoint:
Jan 1 02:00:08 kernel: bLength = 7
Jan 1 02:00:08 kernel: bDescriptorType = 05
Jan 1 02:00:08 kernel: bEndpointAddress = 84 (in)
Jan 1 02:00:08 kernel: bmAttributes = 02 (Bulk)
Jan 1 02:00:08 kernel: wMaxPacketSize = 0020
Jan 1 02:00:08 kernel: bInterval = 01
Jan 1 02:00:08 kernel: Endpoint:
Jan 1 02:00:08 kernel: bLength = 7
Jan 1 02:00:08 kernel: bDescriptorType = 05
Jan 1 02:00:08 kernel: bEndpointAddress = 04 (out)
Jan 1 02:00:08 kernel: bmAttributes = 02 (Bulk)
Jan 1 02:00:08 kernel: wMaxPacketSize = 0020
Jan 1 02:00:08 kernel: bInterval = 01
Jan 1 02:00:08 kernel:
Jan 1 02:00:08 kernel: Interface: 3
Jan 1 02:00:08 kernel: Alternate Setting: 0
Jan 1 02:00:08 kernel: bLength = 9
Jan 1 02:00:08 kernel: bDescriptorType = 04
Jan 1 02:00:08 kernel: bInterfaceNumber = 03
Jan 1 02:00:08 kernel: bAlternateSetting = 00
Jan 1 02:00:08 kernel: bNumEndpoints = 00
Jan 1 02:00:08 kernel: bInterface Class:SubClass:Protocol = fe:01:00
Jan 1 02:00:08 kernel: iInterface = 00
Jan 1 02:00:08 kernel: vlan1: Setting MAC address to 00 1b fc e2 9c 9f.
Jan 1 02:00:08 kernel: VLAN (vlan1): Underlying device (eth0) has same MAC, not checking promiscious mode.
Jan 1 02:00:08 udhcpc[118]: udhcpc (v0.9.9-pre) started
Jan 1 02:00:08 dhcp client: deconfig: lease is lost
Jan 1 02:00:23 udhcpc[118]: No lease, forking to background.
Jan 1 02:00:24 pppd[122]: Plugin rp-pppoe.so loaded.
Jan 1 02:00:24 pppd[122]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 02:00:24 pppd[124]: pppd 2.4.2 started by admin, uid 0
Jan 1 02:00:24 pppd[124]: PPP session is 1776
Jan 1 02:00:24 pppd[124]: Using interface ppp0
Jan 1 02:00:24 pppd[124]: Connect: ppp0 <--> vlan1
Jan 1 02:00:24 pppd[124]: PAP authentication succeeded
Jan 1 02:00:24 pppd[124]: peer from calling number 00:90:1A:42:68:51 authorized
Jan 1 02:00:24 pppd[124]: local IP address 92.113.0.142
Jan 1 02:00:24 pppd[124]: remote IP address 195.5.5.202
Jan 1 02:00:24 pppd[124]: primary DNS address 195.5.46.12
Jan 1 02:00:24 pppd[124]: secondary DNS address 195.5.46.11
Jan 1 02:00:24 dropbear[140]: Running in background
Jan 1 02:00:24 dnsmasq[76]: read /etc/hosts - 5 addresses
Jan 1 02:00:24 dnsmasq[76]: reading /tmp/resolv.conf
Jan 1 02:00:24 dnsmasq[76]: using nameserver 195.5.46.11#53
Jan 1 02:00:24 dnsmasq[76]: using nameserver 195.5.46.12#53
Jan 1 02:00:27 PPPoE: connect to ISP
May 27 17:34:39 kernel: kjournald starting. Commit interval 5 seconds
May 27 17:34:39 kernel: EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
May 27 17:34:40 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,0), internal journal
May 27 17:34:40 kernel: EXT3-fs: recovery complete.
May 27 17:34:40 kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 27 17:34:40 USB storage: ext3 fs at /dev/discs/disc0/disc mounted to /tmp/mnt/disc0
May 27 17:34:42 /opt/sbin/cron[162]: (CRON) STARTUP (V5.0)
May 27 17:34:44 thttpd[170]: socket :: - Address family not supported by protocol
May 27 17:34:45 thttpd[170]: thttpd/2.25b PHP/5.2.5 starting on port 8085
May 27 17:34:45 thttpd[170]: started as root without requesting chroot(), warning only
May 27 17:34:53 ntp client: Synchronizing time with pool.ntp.org ...


than:

wl500gp1.computersystemsltd.com login: admin
Password:
[admin@wl500gp1 root]$ insmod /opt/lib/modules/2.4.20/kernel/net/bluetooth/bluez.o
[admin@wl500gp1 root]$ insmod /opt/lib/modules/2.4.20/kernel/net/bluetooth/l2cap.o
[admin@wl500gp1 root]$ insmod /opt/lib/modules/2.4.20/kernel/net/bluetooth/sco.o[admin@wl500gp1 root]$ insmod /opt/lib/modules/2.4.20/kernel/net/bluetooth/bnep/bnep.o
[admin@wl500gp1 root]$ insmod /opt/lib/modules/2.4.20/kernel/net/bluetooth/rfcomm/rfcomm.o
[admin@wl500gp1 root]$ insmod /opt/lib/modules/2.4.20/kernel/drivers/bluetooth/hci_usb.o
[admin@wl500gp1 root]$


May 27 17:49:17 kernel: BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:49:17 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:49:34 kernel: BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:49:34 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:49:41 kernel: BlueZ SCO ver 0.3 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:49:41 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:50:01 kernel: BlueZ BNEP ver 1.2
May 27 17:50:01 kernel: Copyright (C) 2001,2002 Inventel Systemes
May 27 17:50:01 kernel: Written 2001,2002 by Clement Moreau <clement.moreau@inventel.fr>
May 27 17:50:01 kernel: Written 2001,2002 by David Libault <david.libault@inventel.fr>
May 27 17:50:01 kernel: Copyright (C) 2002 Maxim Krasnyanskiy <maxk@qualcomm.com>
May 27 17:50:01 /opt/sbin/cron[189]: (admin) CMD (/opt/bin/run-parts /opt/etc/cron.5mins )
May 27 17:50:19 kernel: BlueZ RFCOMM ver 1.1
May 27 17:50:19 kernel: Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:50:19 kernel: Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
May 27 17:51:13 kernel: BlueZ HCI USB driver ver 2.7 Copyright (C) 2000,2001 Qualcomm Inc
May 27 17:51:13 kernel: Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
May 27 17:51:13 kernel: usb.c: registered new driver hci_usb



[admin@wl500gp1 root]$ rm /opt/var/run/dbus/pid >/dev/null 2>/dev/null
[admin@wl500gp1 root]$ /opt/bin/dbus-daemon --system
[admin@wl500gp1 root]$ /opt/sbin/hcid
[admin@wl500gp1 root]$


May 27 17:54:41 hcid[278]: Bluetooth HCI daemon
May 27 17:54:42 hcid[278]: HCI dev 0 registered
May 27 17:54:42 hcid[278]: Created local server at unix:abstract=/var/run/dbus-eijVwbgJ1o,guid=67d66c095cc159538cc0ec00483c20b2



[admin@wl500gp1 root]$ /opt/sbin/hciconfig hci0 up piscan
[admin@wl500gp1 root]$ hcitool scan
Scanning ...
22:22:22:22:22:22 Andrey_Popov_Widcomm
00:0D:3A:A3:9C:9B Andrey_Popov_MS
[admin@wl500gp1 root]$
[admin@wl500gp1 root]$ /opt/sbin/sdpd
[admin@wl500gp1 root]$sdptool add --channel=2 NAP
NAP service registered
[admin@wl500gp1 root]$



May 27 17:58:40 sdpd[357]: Bluetooth SDP daemon
May 27 17:58:40 sdpd[357]: Starting SDP server



but after:

[admin@wl500gp1 root]$/opt/bin/pand --listen --master --role NAP --devup /opt/sbin/dev-up

May 27 18:04:37 pand[448]: Accept failed. Resource temporarily unavailable(11)
May 27 18:04:37 kernel: schedule_timeout: wrong timeout value 803dff18 from c01817a8
May 27 18:04:37 pand[448]: Accept failed. Resource temporarily unavailable(11)
May 27 18:04:37 kernel: schedule_timeout: wrong timeout value 803dff18 from c01817a8
May 27 18:04:37 pand[448]: Accept failed. Resource temporarily unavailable(11)
May 27 18:04:37 kernel: schedule_timeout: wrong timeout value 803dff18 from c01817a8
May 27 18:04:37 pand[448]: Accept failed. Resource temporarily unavailable(11)



if enable start-bluez from post-mount than router always REBOOT

P.S. may be in previous post I fogot next command:
sdptool add --channel=2 NAP ?????????
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
AndreyPopov
CDMA geek


Založen: 15.4.2008
Příspěvky: 26

PříspěvekZaslal: po červen 02, 2008 4:45 pm    Předmět: Citovat

engy any ideas?
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
engy
CDMA Developer


Založen: 4.11.2004
Příspěvky: 1281

PříspěvekZaslal: po červen 02, 2008 5:26 pm    Předmět: Citovat

AndreyPopov napsal:
engy any ideas?

Maybe. Send me targziped image of your flashdisk with installed bluez and flashfs file to engy (a) centrum (.) cz
Návrat nahoru
Zobrazit informace o autorovi Odeslat soukromou zprávu
Zobrazit příspěvky z předchozích:   
Přidat nové téma   Zaslat odpověď    Obsah fóra koppel.cz -> English: Our firmware for USB modems Časy uváděny v GMT + 1 hodina
Jdi na stránku 1, 2  Další
Strana 1 z 2

 
Přejdi na:  
Nemůžete odesílat nové téma do tohoto fóra.
Nemůžete odpovídat na témata v tomto fóru.
Nemůžete upravovat své příspěvky v tomto fóru.
Nemůžete mazat své příspěvky v tomto fóru.
Nemůžete hlasovat v tomto fóru.


Powered by phpBB © 2001, 2005 phpBB Group
Český překlad phpBB Czech - www.phpbbcz.com