Skip to content

CDMA@wifi

Sections
Personal tools
You are here: Home » English section » History of versions

History of versions

Document Actions

    1.9.2.7-10-USB-1.71 * Fixed: support for AnyDATA ADU-635WH

    * Fixed: problem when setting WAN type

    * Fixed: DNS problem when backup connection is used

    * Fixed: DNS problem when L2TP or PPTP connection is used

     

    1.9.2.7-10-USB-1.70 * Support for new T-Mobile 4G modem * usb_modeswitch for switching ZeroCD modem to regular modem * web interface for usb_modeswitch with 18 predefined modems * Selection on which USB port is the modem connected * Option to disable USB 2.0 controller in USB Connection menu item * Support for AnyDATA ADU-635WH modem 1.9.2.7-10-USB-1.69a * WL500gpv2 has USB problem with USB 1.1 devices over USB 2.0 ehci driver USB 2.0 support disabled ! I'm 99% sure that this is a HW bug of CPU BCM5354 * Support for Siemens MC75 modem in acm driver * User defined serial port speed for GPRS and dialup connection 1.9.2.7-10-USB-1.69 * Check time for backup connection can be 0 for "as fast as possible" * Workaround in DDNS periodic update * Fixed not showing signal strength in Wireless Details * Fixed problem on some celular networks with ipcp reconfigure after connection causing not set default gateway * Removed OpenVPN as a part of firmware * NFS server and client is back - Added RTC support for the WL-HDD/WL-700g boards - Fixed a bug causing lockups during reboot - SNMP: uptime values no longer depends on the system time - UPnP: it's now possible to select interface for which interface address reported back to clients (IP Config - Misc), port-forwards are working just like other virtual servers - UPnP: additionally protected by built-in firewall in case when multicast forwards enabled - IPTV: added udpxy (check IP Config - Miscellaneous: IPTV UDP Multicast to HTTP Proxy Port) to enable-disable it - Added Get IP automatically option to the WAN & LAN page - DHCP: added support for some broken DHCP servers (e.g. Golden Telecom) - Manual DNS server entries are no longer added to routing table - Fixed Redirects in the web-iface (it should no longer redirect to internal address); - Enabled Idle Disconnect functionality for PPPoE/PPTP. It's recomended to turn this feature off by typing zero in this field. - L2TP speed increase (up to 2.5 times compared to previous versions) and correct tunnel termination - PPTP sync option is now correctly handled and enabled by default, improved overall stability, cleared up logs; - Updated QuickSetup to recent PPPoE, PPTP and L2TP changes - Added fine grained WPA control on the Wireless page: added separate WPA Enterprise, WPA2 Enterprise, WPA Personal, WPA2 Personal and WPA-Auto-Personal (which is wpa-psk + wpa2-psk for TKIP+AES, wpa-psk for TKIP and wpa2-psk for AES). - Added Regulatory Mode field (802.11d/802.11h/off) to the Wireless - Advanced page. This should fix some problems with Intel WiFi cards (select 802.11d mode). - Virtual Servers has now separate default action in the WAN to LAN firewall. - Added Host Name field to the Manual DHCP MAC list. - Added Comment field to Wireless - Access list. - FTP: switched to vsftpd, reworked web-iface. - Samba: extended web-iface, new share modes - all partitions, manual share list. - Samba: Windows Vista support, W2K3SP1 compatibility - Added utf8 as default encoding of the hard/flash drive (enabled by default). - NFS: fixed some /etc/exports problems - Kernel modules are now stored in single directory - Added ftdi_sio usb to serial converter module - Some other modules are now available as separate download (modules-1.9.2.7-9.tgz), includes HID, input, Bluetooth. Unpack them to /opt - Added modprobe, which is looking for /opt/lib/modules/... by default. - USB updates - VLAN support fixes, updated robocfg - dropbear 0.50 (credits to lly), enabled inetd support - busybox_httpd fixes: new cgi environment vars (HTTP_HOST, CGI_*) - Changed a way how automount works: everything is mounted to /tmp/mnt now, while /tmp/harddisk is just a symbolic link to first partition - Samba/FTP/NFS relative paths are against /tmp/harddisk - Added /usr/local/sbin/pre-mount to be called before automount (suitable to manual mounts, disk checks, etc). - Added Enable USB Storage selection to the System Setup - Services page to enable usb storage modules to load automatically - Added filesystem type autodetection to automount portition 1.9.2.7-8-USB-1.68 * USB stack from kernel 2.4.35.4 * Support for Huawei E220 modem * USB vid/pid/packetsize can be set for user USB devices * User AT command for dialup connection * Support for UMTS interface of AnyDATA ADU-630WH modem (set 3 in USB device id) * Changing of WEB port for internal network - default 80 * Update DDNS once a day 1.9.2.7-8-USB-1.67 * IPv6, bpalogin and waveserver removed * Support for Axesstel MV110H modem - Patched to WL-500W 1.9.8.5 firmware base code (New drivers for wl and et: 4.108.9.0) - Added support for WL500W - Added support for WL320gE/gP, additional lights are not supported (use WL550gE firmware) - Added a handling for DHCP supplied routes (Use Route page to enable/disable) - Multicast/IPTV: no longer need routes to be specified, cleaned up igmp logs - It's now possible to specify DNS server IP address in the AP mode (added to IP Config page) - Added new flashfs option: try 'flashfs enabled' to enable flashfs loading forever - Added new http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable repository: use 'ipkg.sh install ipkg-opt' during initial ipkg installation - Fixed PPPoE clamping code (set Maximum Segment Size to actual MTU) - L2TP: server name resolution, persist/reconnect fixes - NFS: added statd for proper locking - SMB: Server string, new r/w share mode - /etc/fstab: swapon and post-mount called now properly - USB storage detection should work correctly for Philips mass storage devices - /proc/cpuinfo now reports CPU model, revision and packaging options - Changed connection tracking TCP timeout to 6 hours vs. 5 days - Some WL-HDD IDE fixes - Yet more fixes for built-in flash support (WL-500gP, WL-500W) - Some minor kernel fixes 1.9.2.7-7g-USB-1.66 * Support for AnyDATA ADU-510L modem * Support for AnyDATA ADU-630WH modem in CDMA mode * Support for Zadacom 3G+B modem * wireless details (wewimo) uses informations from /etc/hosts * Speed fix for GTRAN modem 1.9.2.7-7g-USB-1.65 * USB vid/pid can be set for gprs usb connection * System state list - DiagnosticInfo - New Busybox applets (env, cmp, wc, md5sum sha-1) - IGMP proxy added (multicast routing [IPTV]) (IP Config | Route > Enable multicast routing?) - Added an option to specify 802.11 multicast rate (Wireless | Advanced > Multicast rate) - New kernel features (incl. advanced router, new iptables targets) - Fixed compile problems with newer Linux ditributions - Web interface should no longer show Cable Disconnected status - There is now an option to enable/disable DoS protection (Internet Firewall | - Basic Config > Enable DoS protection?) - Built-in ftp server should now work fine in PASV mode - Updated Dropbear to 0.49 - Updated WiFi to 3.90.38.00 - Added support for the 128MB of onboard RAM hiddev support - FPU emulator fixes - WL-HDD IDE fixes - SMART should work now - Onboard flash type diagnostic messages - Fixed flashfs to respect comment signs - flash command now has progress indicator - Station/Ethernet Bridge mode should now associate faster to AP after reboot - WL500g Deluxe/Premium/WL550gE now rescpect WAN port settings from the web - WL500g Premium/WL550gE now better handles OFDM transmitter power setting - Added support for /etc/fstab before automount - Fixed problems then upgradinf via WiFi using WPA/WPA-PSK - Disabled "power off" for all units except WL-HDD - Pressing EZ SETUP button for 3 seconds would cause /usr/local/sbin/ez-setup to be executed 1.9.2.7-7f-USB-1.64 * /usr/local/sbin/resetpressed script is executed when pressing reset button and releasing when PWR light is off 1.9.2.7-7f-USB-1.63 * Templates of scripts in /usr/local/sbin * User/password/apn for IP Wireless * Support for Zadacom 2G a 3G+ * Fix DNS management with backup connection * DDNS (dyndns) is using real outer IP address found by http://ip.xten.net - Switched to Busybox 1.1.3 - VT6212 USB 2.0 patch (10-15% speedup) - USB sticks without MBR should be also now mounted - Storage devices are using async options by default - WL500g Premium support (MirrorBit Flash support, nvram validation, 32mb enabled) !!! The firmware is totally different from the stock one: no DM, different FTP server and Samba! Do not flash if in doubt - you would miss some features !!! - Additional pppd options field is now 255 chars long - PPP now defaults to unlimited number of connection attempts - PPTP connections now use MTU 1400 by default - DHCP+PPTP (0.0.0.0 gateway support in the MAN routes, DNS and default gateway options now could be acquired from DHCP too, symbolic PPTP name support, PPTP client now adds route to the server) - Fixed MAN->LAN firewall issue (be sure to enable WAN to LAN filter and set default action to DROP!) - Fixed some firewall defaults (WAN->LAN is now enabled and DROPs) - "Apply to routing table" option is now in effect - Default gateway is no longer appears in the nameserver list in the AP mode - WL550gE radio on/off feature should work better now (added missing nvram variables) - SIGALRM is no longer blocked in the post-mount - Minor bugs... 1.9.2.7-7f-pre5-CDMA-1.62 * Automatic switchover of primary/backup connection to internet * WAN port can be used as LAN port in dialup connection * New version of OpenVPN 2.0.7 * Fix error in NAT list (lsnat) * Starting of script init.usb from inserted USB disku (/tmp/harddisk/init.usb) - Fixed issues with samba writes using large buffers - pppoe ac name and service name are now in effect - Add a workaround for default gateway with non-local address - Updated to dropbear-0.47 - Added flashfs backup (done by engy) - Fixed firewall internal 80 wan accept (done by engy) - PPPoE connections are now forced to be nomppe nomppc - Proper NAT handling for different netmasks (techno report) - Poweroff is working now - Hidden page enter key fix (engy) - Added System Setup | Services Page - Added support for samba cp1251 - Url filter page is removed, as it was not functional - kernel-syn-recv.patch (ported by oleo) - new firewall rules layout (done by unaiur) - WL300g is now working in Home Gateway mode too (reset to defaults is required after upgrading) - Apply button is now does not jump to next page - Added L2TP WAN connection type support (demand dialing/idle timeouts are not supported) - Small lease time should not cause problems with dhcp client anymore - PPTP peer address could now be the same as PtP address - Wi-Fi module updated to 3.90.37 - MTU clamping is fixed once again (should solve lags problems) - USB updates (should improve stability) - PPTP/PPPoE allows now DHCP to be used on the WAN port - just specify 0.0.0.0 as static address - Built-in SSH server should now correctly call sftp installed using ipkg - Webcam drivers update: ov51x-1.65-1.12, pwc 9.0.2 (incl. compression and 640x480) - Kernel support for IPSec NAT-T 1.9.2.7-6b-CDMA-1.61 * Support for T-Mobile 4G wireless internet (IP Wireless) * Fixed driver for AnyDATA modem (connection after disconnect) * Newer driver for PL2303 converter * USB devices list * Resolving peer name in lsnat ("lsnat -n" for list with IP adresese) * Pridana zpet podpora PPPoE a PPTP 1.9.2.7-6b-CDMA-1.60 * Support for AnyDATA ADU E100H modem * flashfs can be readed/stored in WEB management * ipmon : counting traffic for adresses in DHCP static list * User defined dialup connection via uploaded file * Automatic dialing can be disabled * Detailed informations about wireless clients and WDS partners * Information about neighbouring AP's * ARP table list * NAT table list - lsnat * Newer drivers for USB discs * Minor fixes - Timezones fixes, affecting ppp reconnect issues - Fixed pppoe/pptp mss clamping (thanks to Ark+ for reporting) - Added various busybox applets - Fixed UPnP crashes (thanks to tomilius for finding this out) - Yet another WAN port dies fixes - Added snmp support - Updated samba to patched 2.0.10 - WL500g Deluxe VLANs completely reworked - Restore to defaults/shutdown are now called using RESTORE/RESET button as follows: first 3 seconds - power LED on: release button to do nothing next 5 seconds - power LED off: release button to "shutdown" next 5 seconds - power LED blinking: release button to reset to defaults start over - Samba now properly deals with large (> 2gb) files - Fixed ASUS usb printer model parsing bug 1.9.2.7-5a-CDMA-1.57 * OpenVPN including encryption, without SSL * Added tun/tap kernel module * Removed programs PPTP, PPPoE, BPALOGIN, NFS, E2FSPROGS * Fix EU daylight/summer time changing * Applet ipcalc - Fixed RAW printing bugs, switched to unidirectional transfers by default - Fixed support for the WPA-PSK in the Client Mode, thanks to miraculix for findings - Fixed ftp server bug, which prevented files to be uploaded to subdirectories - CET Timezone update by engy, added Czech Republic - Increased number of entries on the Bandwidth page up to 32, patch from engy - Added awk applet, applied mktime patch from engy - Applied timezones uClibc patch prepared by engy - Applied tomilius patches adding several new iptables targets - Updated WL500g Deluxe to use latest ethernet module, removed closed source binaries - Used wireless module from the 1.9.3.6 beta, should improve stability - Rewrote ethernet driver "WAN port dies workaround" completely. This should fix random reboots caused by 1.9.2.7 firmwares - Fixed ppp never ending loop, caused by pressing Disconnect button - Connect and Disconnect button should work better now in the PPTP/PPPoE mode - Removed never ending ping done by firmware, notifying guys from Taiwan of your router, when you press Connect - Updated PPTP client to 1.6.0 - Fixed "Idle 0" as well as probably other settings in the web interface which are allowing 0 to be specified - Add usb serial support to the kernel, included an updated pl2303 version (thanks to Rod Whitby for porting this to the current kernel) - Added chat ppp program - USB services are get started now even if NFS only is enabled (thanks to Rod - Whitby for figuring this out) - Finally, WAN Hostname no longer prevents samba from working - WL500g Deluxe now supports MAC cloning - WL500g Deluxe with an updated bootloader now correctly enables WAN port in the AP mode - ASUS test program is no longer installed, so busybox version is now used ipkg.sh should now correctly create /opt/tmp/ipkg - NFS max block size is now 32K (use with care) - Added codepages 860, 861, 865, 866, 869, cp1250, cp1251 (use usb_vfat_options to pass additional mount flags to mount) - Old upnp entries should not have any effect then upnp is disabled - Added new network type - MAN on the static routes page, should be used with - PPTP/PPPoE connections to access internal networks - Changed maximum number of routes - 16 vs 6 - Fixed a PATH problem in the telnet sessions - RAW printing is now bidirectional (used p910nd 0.7) - Afterburner setting is now accessible on the wl300g/wl500g/wlhdd units (enabled for the supported devices only). You still need to enable it in the hardware by executing wlan_update once in the telnet session/hidden page, this should also fix "range" problem - Added System Command page, which is well known as Hidden Admin Page - Added support for system shutdown - press RESTORE/RESET button until power led turns off completely and release it, your unit should go "down" in - several seconds. Use halt from the command line to do the same. - Replaced /usr/local/sbin/ip-ip and ip-down with ip-up-script/ip-down-script ppp options - Added /usr/local/sbin/pre-shutdown script support - called before reboot/halt - Other usefull things - First publically available firmware with LZMA compressed kernel - Fixed bug in the stupid-ftpd code, which prevented NTFS files to be downloaded - Fixed Telstra Bigpond support (including auto auth server selection) - Updated dropbear to 0.45, fixed several scp related problems - Included nfs server functionality (web integrated) - Several new busybox applets added, including support for mounting nfs shares - Fixed a bug, which is prevented to work client mode then SSID contains spaces - Added support for PPTP configuration when PPTP server is located in the different net: use default gateway field to specify gateway address and - "Hearbeat server" field to specify PPTP server address - Removed debug output from the kernel PPTP/GRE modules and lowered loglevel for PPTP client - Added several new iptables targets, including REDIRECT - WL-HDD should now mount ide disk automagically, as well as any other units with extenal rootfs - Added a support for /usr/local/sbin/post-mount script (it's launched once external drives are get mounted, consider moving dependent stuff from post-boot) - Added color support in the rcamd refresh mode (thanks to benlau for patch) - Added basic IPv6 support (tunneled and static IP address mode) (thanks to phedny for patch) - Update uClibc toolchain to enable RPC and IPv6 support - Added support for installable packages (thanks to Rod Whitby for help) - Replaced both trx and addver binaries with modified openwrt trx (thanks to - Kitsok for helping) - Basic Microsoft MN-700 support 1.9.2.7-3c-CDMA-1.56 * Filtering source IP's passing to ppp * Clearing active IP connection in /proc/ip_conntrack by setting -1 to /proc/sys/net/ipv4/ip_conntrack_max * Minor fixes 1.9.2.7-3c-CDMA-1.55 * acm module patched to fix speed limiting * Connect/Disconnect in Status&Log and in CDMA configuration * Reading informations from modem * 32 bandwidth parameters (was 8) * Support for .htm fies in httpd * Sample ppp files moved to /tmp/ppp/evdo 1.9.2.7-3c-CDMA-1.5 * CDMA configuration only in "Home Gateway" mode * lcp pings for ppp connection * snmpd added * OpenVPN lite client/server added (without SSL) * ip-up and ip-down scripts are editable * Change root->admin in smb.conf - First publically available firmware with LZMA compresses squashfs. 7zip SDK is used - Fully functional MPPE over PPTP connections, updated pptp-linux to 1.5.0 (thanks to Posader for testing and suggestions) - Tx-Only Idle option for PPTP - Added an ability to specify custom pppd options (nomppe-stateful is usefull with MPPE) - Ntp synch interval is now configurable - Added an ability to view syslog messages in the AP mode, added Syslog/NTP configuration page (use IP addresses, names ae not supported yet) - New busybox applets (halt, mkswap, swaponoff, crontab) - Fixed stupid-ftpd bug, causing incorrect rights specified for newely created files, as well as file is now truncated before upload - Added support for WL-HDD rootfs (thanks to Ulrich for initial patch) - Stupid-ftp should now work with some linux ftp clients (thanks to Ulrich for patch) - Fixed minor problem with Samba: setting Hostname in the Special Requiremnt from ISP is no longer affects hostname - Fixed PPPoE connection issues - moved to ppp-2.4.2. Added experimental support for MPPE over PPTP connections. - Fixed kbps/kbits thing in the ASUS Bandwidth Management (thanks to yato to figuring this out) - Manual DHCP assignment list is now limited to 32 entries (vs 8 in stock) - Fixed problems with 1.9.2.7 radius authentication - Fully functional client mode support, just like 1.7.5.9-5 had (i.e. WAN and WLAN interfaces roles are exchanged) - Workaround for broken ISP DHCP servers configurations (solves problem with renewing IP addresses) - Added checks to mount code to not mount the same partitions twice (so, you could now manually mount whatever you want in the post-boot script, and these partitions will not be mounted twice by firmware itself) - Updated dropbear to latest 0.44test4, which includes client ssh now Replaced default ppp/pppoe stuff with ppp-2.4.3 (includes mschap/mschap v2 authentication support, should work with PPTP servers configured for mschap only) - Various pptp/pppoe related fixes, Tx only option is now functional - Added Idle timeout support, broken in the ASUS firmwares. For now, for this to work you need to manually specify DNS server addresses! To make connection permanent either specify idle timeout of 0 or use auto DNS (this way idle is ignored) - Added support for invocation of ppp custom ip-up, ip-down scripts (should be placed to the /usr/local/sbin/ - Fixed problems with "PRINTER: bla-bla-bla" printed to the printer attached to the parallel port - Added simple samba configuration from the web (remember to set LAN hostname, otherwise samba will not work!) - Fixed problems with FTP home directories - Fixed PPPoE/PPTP connection issues - WPA2 & WME enabled, but WPA is not fully functional - Fixed WL-500gx USB 1.1 devices support - Fixed ASUS firmware firewall problems (PPTP passthrough should work now) - Fixed wshaper problems (was not functional in the 1.9.2.7-1) - Added WL-500gx rootfs support - Used GPL 1.9.2.7 sources, WPA2 & WME disabled for now - WL-500gx support - Hopefully, dnsmasq-"starcraft" issue fixed (in fact it looks like race condition) - Syslog is now also running in AP mode - Fixed 1.8.1.7-3 samba problems - Added new busybox applet: crond - Web interface shows decoded uptime now - Changed PPPoE behaviour to be compatible with stock firmware, added 2 new - nvram variables: - wan0_pppoe_maxfail - terminate after wan0_pppoe_maxfail consecutive failed connection attempts. A value of 0 means no limit. The default value is 10. - wan0_pppoe_holdoff - specifies how many seconds to wait before re-initiating the link after it terminates. - Removed PPPoE mru/mtu 1500 warnings - Several new USB HP OfficeJet printers are supported now 1.8.1.7-3-CDMA-1.3 * Show CDMA user/password in WEB configuration * Storing CDMA setup through settings export/import

    Created by administrator
    Last modified 2008-10-20 09:55 AM
    « October 2016 »
    Su Mo Tu We Th Fr Sa
                1
    2 3 4 5 6 7 8
    9 10 11 12 13 14 15
    16 17 18 19 20 21 22
    23 24 25 26 27 28 29
    30 31          
     
     

    Powered by Plone

    This site conforms to the following standards: